Project Puffer Log

WHAT'S NEW is a chronological listing of updates to the BillyBob site.

TRUCK LINKS including vendor sites for old parts, custom parts, and tools as well as sites for classic car and truck organizations

STORE Operating in association with Amazon.com, books, recordings and tools can be purchased.

PLANNING for the restoration including project schedule and cost estimates.

TRAVELS WITH BILLYBOB With apologies to Steinbeck, this area of BillyBob's Garage will be used to log the trips BillyBob and I make together.

WORK-IN-PROGRESS was the restoration of parts of BillyBob that I could accomplish without a garage up until the summer of 2010 when I finally got enough warehouse space to work in. Now, it also includes the continuing work on BillyBob in the shop.

PRE-RESTORATION includes log entries of minor repairs and adventures between time of purchase and the time when I started restoration, a piece at a time.

JR'S KORNER JR's Korner is the history of BillyBob before I got him authored by my brother, Wm. C. Kephart.

BILLYBOB MAINTENANCE Ever changing detailing, oil change, lube, etc. maintenance routines specifically developed for BillyBob, including required tools, materials and procedures.

PROJECT PUFFER Chronicles the rebuild of BillyBob's Stovebolt 235 including the installation of a 4-71 blower system.

PARTS SHOP The Parts Shop is a repository of How-To articles. Things that I have done over and over enough times to have developed a procedure. This gives me a checklist and saves brain cells.

STEALTH SHOP Urban residence design with large integrated shop and separate living quarters for a relative or renter.

You will need the Adobe Acrobat browser plugin to view these wiring diagrams which are in the PDF file format. This format allows zooming and panning. If you don't have this plugin, it can be downloaded and installed (free) from the Adobe site. The button below will take you there.

BILLYBOB WIRING DIAGRAM Here's the wiring diagram updated with BillyBob's current state 'cepting the third-party strap-on turn-signal director.

STRAP-ON TURN-SIGNAL DIRECTOR/BRAKE LIGHT CIRCUIT This turn signal and brake light circuit diagram shows the current state of the third-party turn-signal director wiring, which will remain in place until I figure out the problems with the OEM turn-signal director. It also shows the OEM headlight switch.

When  I decided to pull BillyBob's engine to replace the leaking rear main seal, I got the sheetmetal off the frontend, then BillyBob sat idle for several years. By the time I got back on track, the whole mission plan had changed. Now we're building a hot rod engine with a 4-71 roots blower, hence the name "Project Puffer".

1.	Mock Up	10.26.2015
2.	Tear Down
3.	Bottom Line	10.26.2015

You can email me at  webmaster@laroke.com

Issued Friday October 23, 2015

Updated Monday October 26, 2015

copyright © 2015-2015 Larry Robert Kephart all rights reserved