DEERSLAYER
LINKS including vendor sites for parts and tools as well as
sites for old truck and hot rod organizations
TINKERING
WITH DEERSLAYER chronicles the day-by-day maintenance and
improvements episodes for Deerslayer, a '37 Chevy farm truck hot rod.
CRUISIN'
WITH DEERSLAYER Roadtrips, cruise-in's and truck show stories
and tall tales.
TONY'S
DUNGEON Tony Pascarella's forum entries at OldGMCtrucks.com
regarding Deerslayer, particularly the 302 GMC engine build in his
farmhouse basement.
DEERSLAYER
MAINTENANCE Ever changing detailing, oil change, lube, etc.
maintenance routines specifically developed for Deerslayer, including
required tools, materials and procedures.
PROJECT
NAILHEAD Chronicles the rebuild of a 1954 Buick Roadmaster
322 nailhead engine as a future replacement for Deerslayer's Jimmy 302.
|
3. Bottom Line
February 16th 2012
I thought it was time to start keeping tabs on how much project
nailhead will cost as I begin to gather parts from the far reaches. I'm
only gonna record parts and outside services like machining in this
section. Tools I have to get will not be a part of it.
|
|
|
1. |
1954
Buick 322 engine |
$600.00 |
2. |
1956
Buick 322 flywheel |
$383.39 |
3. |
Trans-Dapt
HC-25 - 53 54 55 56 Nailhead Buick engine to Chevy transmission adapter |
$298.00 |
4. |
1954
Buick 322 thermostat housing / cross-over manifold |
$55.44 |
5. |
Isky
E3 solid lifter cam for Buick 264/322 engine |
$168.45 |
6. |
Remanufactured
Water Pump for Buick 264/322 engine |
$135.00 |
7. |
Intake
Offenhauser 3X2 aluminum for Buick 264/322 with holley 94
carbs |
$490.00 |
8. |
SNAP
gear reduction Mini Starter 322 |
$235.00 |
9. |
Hurst
Motor Mounts 322-425 |
$177.65 |
10. |
FACTORY
EXPORT RACING rocker arms adjustable 322-425 |
$411.72 |
11. |
Hurst
Frame Adapters 1954-1964 Ford Pickup Truck |
$72.72 |
12. |
Hurst
V8 saddle motor mount rubber biscuit set complete with washers
& bolts |
$34.95 |
13. |
264
322 364 Buick Nailhead Stainless Hex Engine Bolt Kit |
$57.73 |
14. |
Latham
supercharger on small block Chevy Winters intake with four Carter 3172S
sidedraft carburetors |
$2,969.94 |
15. |
SoCal
Finned
Aluminum Valley Cover |
$147.46 |
16. |
Latham
supercharger on small block Chevy fuelie intake with four Carter 3172S
sidedraft carburetors, pulleys, 2 belts and Chevy magneto |
$5,125.00 |
17. |
New timing chain and gear set |
$113.14 |
18. |
1956 Buick 322 starter, rebuilt |
$224.00 |
19. |
Buick nailhead 264 322 364 401 425 53-66
spark plug wire covers eelco weiand |
$153.00 |
20. |
Vertex Magnetos Ronco NOS Distributor
1958 Buick |
$1,519.99 |
21. |
.842 OD Solid Mechanical Tappet Lifter
1949-1967 Oldsmobile 1953-1967 Buick V-8 |
$60.50 |
22. |
264 322 Buick Nailhead 4-71 Blower
Manifold |
$905.00 |
23. |
Best 1953-1956 Buick 264/322, 1956-1959
Chevrolet Truck 322 Full Engine Gasket Set |
$213.11 |
24. |
1953-1966 Buick V-8 Nailhead Engine
Freeze Plug Kit |
$34.35 |
25. |
322 Buick V-8 Nailhead Engine Valve
Guides and seals, Rear Main Rope Seal, Oil Galley Plug Kit and Roller
Timing Chain Kit
|
$331.00 |
26. |
322 Buick V-8 Nailhead Engine 1954 Intake
and Exhaust Valves
one each |
$49.50 |
27. |
Buick 53-56 Dynaflow Flywheel Dust Cover |
$149.37 |
Some of these items will not be used in the final build.
They will be removed from the list at that time.
|
You can email me at webmaster@laroke.com
Issued Thursday March
15, 2012
Updated Wednesday January 18, 2022
copyright © 2012-2022 Larry Robert
Kephart all rights reserved
|